Hall Technologies CUSB3V1-AP15 USB 3.0 Javelin Active Optical Plenum Cable with Regulated Power, 15 Meters

Hall Technologies CUSB3V1-AP15 USB 3.0 Javelin Active Optical Plenum Cable with Regulated Power, 15 Meters

Available in lengths of 15, 30, 50, 75 and 100 meters, CUSB3V1-AP* cables support transparent extension of USB 3.1 Gen1 Super-Speed at data rates of up to 5 Gbps. It is also downward compatible with USB 2.0 or 1.1 devices. An additional 5 volt regulator on the receiver end will boost the power to compensate for power hungry USB cameras. CUSB3V1-AP* cables are compatible with virtually all USB 3.0 and 3.1 Gen1 devices, and are a perfect solution for extending 4K videoconferencing cameras, video capture, docking stations, and other high-speed data communication.

Key Features

• Data transfer rates of up to 5 Gigabits per second
• Offers fiber-optic noise immunity
• Plenum Rated
• Provides precise regulated 5v output power at the remote end @ up to 900 ma
• Supports all USB 3.0 devices on all platforms
• Thin and flexible with bend radius of 0.3 inch
• No additional power supply required

Technical Specifications

Input
Male USB 3.0 Type A
Output
Female USB 3.0 Type A
Available Lengths
15m (~50ft), 30m (~100ft), 50m (~164ft), 75m (~246ft) and 100m (~328ft)
USB Standards
USB 3.0 or USB 3.1 Gen 1
Bandwidth
5 Gbps max
Supply Voltage
Powered from USB 5v pin
Nominal: 5v (operating range: 4.7v~5.3v)
Damage will occur if 5v input > 6v
Supply Current
Nominal: 50 ma max (not including remote USB device load)
Load Ratings
15 meter: 5V 850 ma
30 meter: 5V 700 ma
50 meter: 5V 700 ma
75 meter: Must use power inserter built into the connector head, power insertion cable included.
100 meter: Must use power inserter built into the connector head, power insertion cable included.
Power Consumption
Nominal: 0.25 watts
Grade
Plenum CMP (UL)
Color
Black
Diameter
5 mm (0.2 inch)
Bend Radius
8mm (0.3 inch) minimum
Connector Pull Strength
10 Kg (22 lbs) maximum (never pull on the connector, use a pulling sock
Connector Housing Dimensions
USB A Male (Host side)
1.4 inch x 0.6 inch x 0.3 inch (35.6mm x 15.3mm x 7.6 mm)
Total length including USB and Strain relief: 2.3 inch (58.4mm)
USB A Female (device side)
1.8 inch x 0.6 inch x 0.3 inch (45.7mm x 15.3mm x 7.6 mm)
Total length including Strain relief: 2.2 inch (55.9mm)
Temperature/Humidity
Storage
-4 to +158 F (-20 to +70 C) / 5% to 90%, non-condensing
Operating
+32 to +122 F (0 to +50 C) / 10% to 85%, non-condensing
Regulatory EMI/EMC
CE, RoHS
CE, FCC Class A